Momentum – Dongguan Mingrui Technology Co., Ltd.

Fully Automatic Solder Paste Printer MPM Momentum II

❙ Introduce of SMT Solder Paste Printer MPM Momentum II

Newly designed cover set with larger window and wider access inside the printer.
Quick release squeegee for faster changeover.
Adjustable stencil shelf for flexibility handling board varieties.
New jar paste dispenser for increased productivity.
Solder paste roll height and paste temperature monitoring for yield improvementand traceability.
Upgraded Benchmark GUI with customizable production page and Quickstart program.
Windows 10 operating system.

❙ Specification of SMT Solder Paste Printer MPM Momentum II

MPM Momentum II 100
BOARD HANDLING
Maximum Board Size (X * Y)	609.6 mm x 508 mm (24” x 20”)
A dedicated workholder is required for boards with an X size greater than 20”
Minimum Board Size (X x Y)	50.8 mm x 50.8 mm (2” x 2”)
Board Thickness	0.2 mm to 5.0 mm (0.008” to 0.20”)
Maximum Board Weight	4.5 kg (10 lbs)
Board Edge Clearance	3.0 mm (0.118″)
Underside Clearance	12.7 mm (0.5″) standard Configurable for 25.4 mm (1.0”)
Board Hold-Down	Fixed top clamps, centernest vacuum
Board Support Methods	Magnetic pins Optional: Vacuum side dams, vacuum pins, support blocks, dedicated fixtures, patented auto tooling, Quik-Tool
PRINT PARAMETERS
Maximum Print Area (X * Y)	609.6 mm x 508 mm (24” x 20″)
Print Gap (Snap-off)	0 mm to 6.35 mm (0″ to 0.25″)
Print Speed	0.635 mm/s – 304.8 mm/s (0.025 in/s – 12 in/s)
Print Force	0 to 22.7 kg (0 lb to 50 lbs)
Stencil Frame Size	737 mm x 737 mm (29″ x 29″) Adapters available for smaller sizes
VISION
Vision Field-of-View (FOV)	10.6 mm x 8.0 mm (0.417” x 0.315”)
Fiducial Types	Standard shape fiducials (see SMEMA standards), pad/aperture
Camera System	Single digital camera – MPM patented look up/down vision
PERFORMANCE
Total System Alignment	±12.5 microns (±0.0005”) at 6 sigma
Accuracy and Repeatability	Cpk ≥ 2.0*
Qualification is performed using production environment process variables; print speed, table lift and camera movement are included in the capability figure.
Wet Print Deposit	±20 microns (±0.0008”) at 6 sigma,
Accuracy and Repeatability	Cpk ≥ 2.0*
Based upon actual wet printing with positional accuracy and repeatability verified by a 3rd party measurement system.
Cycle Time	11 seconds standard
FACILITIES
Power Requirements	200 to 240 VAC (±10%) single phase @ 50/60Hz, 15A
Air Supply Requirements	100 psi at 4 cfm (standard run mode) to 18 cfm (vacuum wipe) (6.89 bar @ 1.9 L/s to 8.5 L/s), 12.7 mm (0.5”) diameter line, OD x 9.5 mm (3/8”) ID line
Height (excluding light tower)	1589.4 mm (62.57″) at 940 mm (37.0”)transport height
Machine Depth	1394 mm (54.88″)
Machine Width	1195.4 mm (47.06”)
Minimum Front Clearance	508 mm (20.0”)
Minimum Rear Clearance	508 mm (20.0”)
Machine Weight	797 kg (1757 lbs)
Crated Weight	1090.5 kg (2399 lbs)